Koje su karakteristike procesa laserske vodene ploče?

  Any kind of material has its own characteristics, and the laser light guide plate is no exception. Then, the characteristics of the process of its material refer to the ability of this material to process requirements. It can be shown in the characteristics of the data. These factors also determine whether it is suitable to be processed into what kind of product, and the quality of the product.

  The molding of the material is an important indicator of whether the product is good or bad. This process has a great impact on the effect of planning. For example, the technological method and technological level, and then the adoption of new technology, as well as its general application, have a great relationship. There are several principles for data molding. The first is the demand for high efficiency, then the high quality and low cost. The premise of these principles must be focused on product quality. If the quality is not up to standard, there will be no economic benefits, so the first few principles are meaningless. When choosing a suitable process for a laser light guide plate, it is necessary to have a detailed understanding of its required range and forming process.

  The connection process of data is also very important, so when choosing connection, several factors need to be considered. Its connector features, as well as disassembly and assembly functions, operation functions, as well as the use environment of the product, environmental protection elements and so on. Economic factors are also what we must consider, and the final is the aesthetic requirement. It can be seen from this that a small laser light guide plate actually involves various aspects. Not only have a deeper understanding of the material, but also know more about its craftsmanship.

karakteristika:

1. Tehnologija bez rešetki-svjetlosnog vodiča: površini svjetlovodne ploče nije potrebna nikakva mrežna tačka, planiranje mreže i obrada, što uvelike poboljšava proizvodnu snagu;

2. Princip refleksije difuzora: visoka stopa konverzije svjetlosti, ujednačen svjetlosni efekat, mekana i ne{1}}privatna;

3. Stabilna funkcija: Materijal za vođenje svjetlosti je nezavisno razvijen i proizveden, izliven čistim MMA monomerom i proizveden u montažnoj liniji. Stabilnost kvaliteta proizvoda kontrolira se iz izvora kako bi se osigurala konzistentnost funkcija svake serije proizvoda;

4. Prekinite ograničenje tradicionalne ploče za vođenje svjetlosti: može se rezati u bilo koji oblik, može se vruće savijati i može se spojiti i koristiti;

5. Može se primijeniti u zatvorenom i na otvorenom, u okruženju primjene bez polova, gotovo da nema slabljenja optičke funkcije, a vijek trajanja može doseći 8-10 godina;

6. Prirodni dvostrani-vodič svjetla, koji se može koristiti na jednoj ili na obje strane, kao što je dvostrano-korištenje, isplativije je-;

7. Može koristiti bilo koji tačkasti izvor svjetlosti, linijski izvor svjetlosti za konverziju površinskog izvora svjetlosti, izvor svjetlosti uključuje LED, lampu cijev, laser, itd.;

8. Inventar se može pripremiti, lako kontrolisati habanje i poboljšati sveobuhvatnu stopu iskorištenja originalne ploče. Akrilni difuzor